Ventilation duct

Winflex ventilation, CIS ProductsAluminium sheathing Ventilation accessories such as aluminium ducts, simple or soundproofed for air extractor, will allow the air to circulate perfectly in your grow room. All sizes of indoor chambers have their existing ducts in different diameters, from 1...

Winflex ventilation, CIS ProductsAluminium sheathing

Ventilation accessories such as aluminium ducts, simple or soundproofed for air extractor, will allow the air to circulate perfectly in your grow room. All sizes of indoor chambers have their existing ducts in different diameters, from 100 mm to 356 mm. There are several qualities of ducts, aluminium, combined, soundproof. These products are available on Indoor Discount.

When air flows through the extractors, noise pollution can occur and soundproof ducts are a solution. Also think about the clamps to hold and orientate the ducts. And don't forget the other duct accessories.

What is ventilation ducting? ducting is an essential accessory for connecting ventilation devices such as air extractors, aerators, duct fans and ventilation boxes, in order to evacuate air or humidity to the outside of a room, office or bathroom. this ducting allows hot or cold air flows to pass through in order to renew the air and provide healthy air.

how to install a ventilation duct? Ventilation ducts are easy to install: for example, if you buy a 125mm air extractor, you'll need to buy 125mm ducting, often sold in 127mm, so as to leave 1mm on each side to be able to connect it and thread it onto the appliance like a sock, once the duct has been installed, it's advisable to secure it hermetically with a turn of aluminum tape to make it as airtight as possible, then add a screw-on clamp to hold the duct in place. For a cleaner installation, you can replace the tape and clamp with a connecting sleeve fitted with a gasket to seal the ventilation duct. the concept is the same for all other sizes of ventilation duct.

are there any connectors for ventilation ducts? you can find a wide range of accessories, such as elbows, Y, T, 30°, 45°;60° and 90°, flanges of all sizes in pvc and metal, duct reducers to go from a 150mm to a 125mm duct, ventilation non-return valves, screw-on collars, duct relocation accessories to avoid redoing a whole ventilation network, a huge choice of ventilation grilles to limit the entry of insects and pests into your ventilation ducts, to which you can add a pollen filter and a particle filter for healthier breathing in your home.

which types of duct :

Aluminum ducting

Combi PVC/ALU ducting

Soundproofed SONO ducting

Soundproof Wadding Duct

Semi-rigid aluminum

Plastic sheath

rectangular, square and round PVC conduit

aluminum ducting is the most widely used M1 in terms of fire standards, this ventilation ducting will offer you robustness and great flexibility even for making turns, aluminum ducting is noisier than combi ducting for example.

The ALU/PVC combi duct is an aluminum duct covered with a layer of PVC to limit the noise of the air flow through the duct, with an aesthetic black exterior and an aluminum layer on the inside. The double layer provides better thermal insulation.

Soundproof SONO ducting is made of aluminum, with 2 layers of aluminum, one thicker than the other, to enclose a thick layer of rock wool (25mm to 50mm depending on the model) for maximum soundproofing against the sound caused by the ventilation unit and the air circulating through it. This ducting is highly thermally efficient and insulates well against cold, with sound insulation of almost 75% of traditional noise.

SONO Ouate is based on the same design as rockwool, except that it is replaced by wadding as in pillows or comforters. Its thermal performance is superior, but its soundproofing is less effective.

Semi-rigid aluminum ducting is a 100% pure aluminum M1 fire-standard ducting that's easy and practical to install: when you bend the duct, it stays in place, so it's easy to bend around corners, and it stays in place without sagging when there's a bit of slack.

Plastic ducting is made from basic-quality PVC. We don't offer this product, which is sometimes sold at a high price in supermarkets, because it's absolutely no match for good aluminum ventilation ducting, which is much more resistant over time.

PVC ventilation ducts are available in many shapes and sizes: rectangular, square and round, in 50cm, 100cm, 150cm and 200cm tubes, for ventilation installations or as air-conditioning ventilation ducts. A complete range of accessories, including elbows, Ys, T reducers, connectors and extensions, is 100% modular, so you can install clean, stylish ducts that blend in perfectly without making a mess, suitable for warehouses and offices, and for residential use in false ceilings.

Discover simple or soundproof aluminum ducts for air extractors, allowing air to circulate perfectly in your grow room. All sizes of indoor chamber have their own ducts, available in different diameters, from 100 mm to 356 mm. There are several qualities of ducts: aluminum, combined, soundproofed. These products are available on Indoor Discount.

When air passes through extractors, noise nuisance can occur, and soundproofed ducts are a solution to make the air flow silent. And don't forget hose clamps to hold and orient ducts. Not forgetting other duct accessories.

78 produits correspondant
Sort by:
Relevance