Calitek

Lighting controller Pro - Calitek

Indoor Discountpresents its horticultural lighting controller

Read more
€500.00

Frequently purchased together

Products selected for :

Data sheet

  • Type
    Controller
  • Eco-participation in euros
    0,11
  • Digital lighting controller for intelligent crop management


    Take control of your grow room for intelligent light management.
    The controller Calitek allows for pre-set cis for efficient results and abundant harvests.

    For successful indoor growing, it's imperative to be vigilant about ambient temperatures, humidity, VPD (vapor pressure deficit), and C0² injections.

    Digital lighting controllerCalitek is a real technological gem.
    It allows multiple settings, with management of up to 300 lights per controller

    The design gives you the option of asynchronous synchronization, high temperature dimming and auto shutdown, sunrise/sunset simulation and a ''Cloud Mode'' for energy-efficient simulation of cloud cover.


    Advantages:

    - Lighting capacity: 2 independent rooms for ideal light control. Up to 150 per room, for a total of 300.
    - System time and date: Set date and time.
    - Temperature units: Set temperature units.
    - Cloud Mode : This exclusive function allows you to simulate sunrise, sunset and cloud cover Calitekthis exclusive function saves energy and simulates the cloudy mass
    which sometimes hides the power of the sun.
    - Lighting-based temperature sensors: The sensors are used to monitor
    the ambient temperature in the event of overheating, and to make intelligent corrections. Up to 25 sensors per room, for a total of 50.
    - Display mode: The user can choose between a wattage(W) or percentage (%) display. The (W) mode lets you set predefined actual power levels, while the (%) mode lets you reduce power levels between 50% and 110%.
    - Light selection: Select lighting for room 1 or 2. If your lighting can be dimmed, a power selection is imperative.
    -
    Light cycle 1: Timer settings for room 1. Enables a pre-set programcis timer for the growing or flowering phase. A 24-hour timing function is available as an option. Asynchronous operation is also possible, enabling a lighting program to be defined in relation to the normal 24H program.
    - Light cycle 2: Timer settings for room 2. Allows a precis timer for the growth or flowering phase. It is possible to have a faithful or reversed replica of the program for room 1, or to customize room 2 independently.
    - Auto dimming at high temperature: If the room is too hot, and when the set point is reached, the light intensity will be reduced by 50%, until the temperature drops by 3°C.
    - Auto shutdown at high temperature (secondary safety): If the Auto Dim function does not correct the temperature sufficiently, the system will switch off all lights if the ambient temperature exceeds the preset value.
    - Sunrise and sunset: A useful option for simulating sunrise or sunset.
    Sunrise/sunset program from 30 to 90 minutes.
    - Output mode: Set the operating mode for garden 1 and 2.
    - Data log : Provides a history of all temperature fault results, lighting power adjustment...
    - Return to factory settings: Parameters can be reset.
    - VPD - Vapor Pressure Deficit: Thanks to the camera, RH% sensor and temperature sensor connected to the controller, you can obtain a VPD value.



    The box contains :

    120/240V 5V power adapter
    Wall base with powerful magnet attachment.
    2 connections
    Touch screen.
    Glass interface.
    Intuitive operation, very easy to use.

    • Type
      Controller
    • Eco-participation in euros
      0,11
    • Trier ses déchets

Our customers also liked