Lamp Kit CMH Pro double ended - 630W 4000k - Calitek
Indoor Discount offers you its product : Kit Lamp CMH Pro double ended - 630W 4000k - Calitek
Lamp Kit CMH Pro double ended - 945W 3100k - Calitek
The adjustable design of this kit will make it your main ally to light up your crops. Thanks to the SMART START ignition control ™ and the soft start technology, this kit ensures high energy efficiency and silent operation. It has full circuit protection and can operate at high temperatures.
Lamp: 1000W HPS/MH
Voltage: 240V, 50/60Hz
Current: 4.4A / 240V
Inrush current: 60A / 220Vac
Maximum output power: 1150W
0.5mA max at 180-300Vac
THD: < 10%, 60Hz
Input voltage range: 100-265Vac
Unit size: 64.4 x 37.3 x 10.5 cm
Turn-on time: 3-10 seconds
Input frequency: 47 / 63 Hz
Protections: Open circuit / Short circuit / Overvoltage / Undervoltage / Overheating
Insulation voltage: Input/Gnd 1600Vac - 5mA 1Min
Insulation resistance: Input/Gnd 50MΩ - 500Vdc 1Min
Dimmer: 600/630/750/945/1000/SUPER PAR
Open circuit voltage: < 300V
Ignition voltage: 3-5 KV
RF interference: NO
Operating humidity: 20-95%
Storage humidity: 10-95%
IP tightness: IP20
The CALITEK digital ballast is suitable for all high-pressure sodium (HPS), double-ended metal halide (MH) and double-ended CMH lamps.
For the perfect combo and best results we recommend CALITEK lamps.
CALITEK lamps are optimised for use with electronic ballasts with adjustable output.
600W: for HPS or MH lamps / 630W: for CMH 630W, HPS or MH lamps / 750W: for HPS or MH lamps / 945W: for CMH 945W, HPS or MH lamps / 1000W: for HPS or MH lamps / SUPER PAR lamp: for HPS or MH lamps only
Note that you must use 1000W MH or HPS bulbs. In addition, for CMH bulbs, the dimmer must be set to 630W or 945W bulb power.
1 x Lighting system Pro Reflector + Double ended ballast 600-1100W - Calitek E-Link + dimmer Super Par 10% 1 x Double ended CMH 630W 4000K double ended bulb - Calitek
Consumptionfrom 0.50 to 1 kw/h
Be the first to write your review
Nos clients ont aussi aimé